Table of Contents
Advertisement
Numbered keypad
27
Press 0 to 9 to enter a password when required.
Note
Remote Control (IR) or Remote Control with Laser Pointer (depending on region).
See Appendix for the Remote with Laser Pointer.
Using the remote mouse control
The capability of operating your computer with the remote control gives you
more flexibility when delivering presentations.
1. Connect the projector to your PC or notebook with a USB cable prior to
using the remote control in place of your computer's mouse. See
"Connecting a computer" on page 18
2. Set the input signal to VGA1 or VGA2.
3. Press switch button to turn on mouse function. Mouse icon will appear on
the screen confirming the activation of the mouse.
4. Perform the desired mouse controls on your remote control.
To move the cursor on the screen, press
To left-click, press L.
To right-click, press R.
To return to the normal mode, press Switch again.
Note
HDMI also supports mouse function.
OSD must be closed before turning on the mouse function.
EN-14
for details.
/
/
/
.
Advertisement
Table of Contents
