Table of Contents
Advertisement
ROOM AIR BLOWER OPERATION
Your heater is equipped with a room air blower. For operation and wiring see Figure 14.
For your convenience your heater is equipped with a rheostat with which you are able to select
the air flow. The auto and manual switch will allow you to select the position at which the
thermostat will function.
Figure 14
Auto-position: After heater has warmed up and the Auto-Manual switch is placed in "Auto"
position and the rheostat is in the desired position, then the fan will automatically come on.
When the stove cools off the fan will automatically shut-off.
Manual position: You must turn the room air blower on and off.
NOTE: Plug the power cord into a 115V AC outlet. Set switch to "Manual" and rheostat to
"High" position to ensure motor operates properly. Route the cord to prevent damage to the
cord insulation from heat and sharp objects. Keep the cord out of the way of traffic to prevent
damage caused by tripping, etc.
32
Advertisement
Table of Contents
