PowerLogic EGX400 Instruction Bulletin page 14

Storing Files Onboard The EGX400
14
6. At the "User [IP address:(none)]:" prompt, press Enter.
The Password prompt displays (Figure 4).
Figure 4: Password prompt
7. At the Password prompt, enter the administrator password (admin is the
default password until the administrator changes it).
8. At the ftp prompt, type send [filename] and press Enter to initiate the ftp
transfer. (In this example, we entered "send Example.htm"). When the
download is complete (Figure 5), the "ftp" prompt displays again.
NOTE: Limit filenames to eight characters plus a three-character
extension.
.
Figure 5: Download complete
9. If you have another custom web page to download, type send [filename]
and press Enter. If you are finished downloading files, type quit and press
Enter to exit the FTP session.
63230-314-202/A1
January 2002
© 2002 Schneider Electric All Rights Reserved