Servicing - New Buck Corporation 1110 User Manual

WARNING:
ELECTRICAL GROUNDING INSTRUCTION: THIS APPLIANCE
IS EQUIPPED WITH A THREE-PRONG (GROUNDING) PLUG FOR YOUR
PROTECTION AGAINST SHOCK HAZARD AND SHOULD BE PLUGGED
DIRECTLY INTO A PROPERLY GROUNDED THREE-PRONG RECEPTACLE.
NOTE: #PE A24001 Blower Motor
Rating: 120 volts/60MZ/0.54 Amps. 1 P.H.
Blower Motor is standard on all Model 1110. See page 38 for blower motor location.
NOTE: For convenience, allow licensed electrician to properly install a grounded 3-plug
receptacle near the unit.
Repair and replacement work should only be performed by a qualified service technician.
Always shut off the gas supply and make sure heater is cool before beginning any service
operation. Check for gas leaks after servicing.
A parts list with exploded view follows. Always include correct name, part number, and model
number of the heater when ordering service parts. Please contact your local dealer or distributor
when ordering. If one is not available, you may contact:

SERVICING

REPAIR PARTS
New Buck Corporation
8000 Highway 226 South
Spruce Pine, NC 28777
828-765-6144
29