Operating Instructions - DeVilbiss D25617 Operator's Manual

Table of Contents

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING

YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with

the location of various controls and adjustments. Save this manual for future ref-

erence.

Multi-Reg

Wand

High

Pressure

Pump

BASIC ELEMENTS OF A PRESSURE WASHER

High Pressure Pump (located inside the shroud): Increases the pressure of the

water supply.

Engine: Drives the high pressure pump.

High Pressure Hose: Carries the pressurized water from the pump to the gun

and wand.

Spray Gun: Connects with wand to control water flow rate, direction, and pres-

sure.

Multi-Reg Wand: Has a spray nozzle which adjust from a pencil stream (0°) to a

wide angle fan spray (40°). The spray can be adjusted by twisting the nozzle

clockwise and/or counterclockwise. Also, the high and low pressure settings can

be controlled by moving the nozzle in and out. See Operation section.

Chemical Hose: Allows cleaners or cleaning solvents to be mixed with the pres-

surized water stream. See How To Siphon Chemicals/Cleaning Solvents in

Operation section of this manual.