D-Link DFE-530TX+ User Manual page 8

Section 2 - Installation
Note: Write down the serial number and hardware revision (e.g. G1) of the adapter
before installing. If you contact technical support, you will need this information.
Step 4 - Install the DFE-530TX+ into your computer.
a. Shut down the computer, unplug its power cord, and remove
the chassis cover. Note that opening the case of your computer
may compromise the warranty of your computer. Consult the
computer manufacturer before opening the case to ensure that
you adhere to warranty guidelines.
b. Insert the contact edge of the DFE-530TX+ card into the
connector of any available PCI slot. Press the card firmly into
the connector such that the card's contacts are fully seated in
the connector.
c. Install the bracket screw that secures the card to the computer
chassis.
d. Replace the computer's chassis cover. Connect an Ethernet
cable from the adapter to your router, switch or Ethernet device.
e. Plug in the power cable and power on your computer.
Step 5 - Once you boot your computer, Windows® will automatically install the drivers. You will receive a bubble stating Windows
has finished installing the DFE-530TX+ adapter.
Step 6 - Please refer to the user manual on the supplied CD-ROM for more information on configuring your adapter and
advanced features.
D-Link DFE-530TX+ User Manual 8