Product Features; Main Dimensions/Weight; Loading Quantity; Electrical Performance - Philips 160VW9FB/78 Service Manual

58 58 HUDSON 9
1. This short specification describes the electrical, optical and functional performance requirements for a 395mm
(15.6") TFT LCD color monitor with VGA compatible interface.

1.1 Product Features

395mm(15.6") a-si TFT Active matrix LCD panel, 0.252mm pixel pitch
Microprocessor controlled scan technology
19 factory presets
Vertical refresh rate 55Hz to 75Hz
Horizontal frequency 30KHz to 60KHz
Resolutions: 640X480 up to 1366X768
Universal power supply designed for worldwide application
CE mark
VESA DPMS compliant
VESA DDC2B compliant
1.2 Main Dimensions/Weight (only for reference, according to final SHT 560)
Width:
Height:
Depth:
Weight:
1.3 Loading Quantity (according to final SHT 560)
2736 sets for 40' container (w. pallet)
2.

Electrical Performance

All tests must be performed under "standard testing conditions" (item 2.1) unless otherwise specified.

2.1 Standard testing conditions

- Warm up time
- AC supply voltage
- Ambient temperature
- Humidity
- Display mode
- Contrast control
- Color temperature
- Brightness control
- Input signal
- Picture position and size
Viewing angle
Viewing distance
Ambient illumination
2.2 Video Signals
2.2.1 Analog Inputs (R,G,B)
Level
Polarity
Impedance
Max. dot clock
Monitor
361mm
293mm
190mm
2.7kg
: ＞ 30 min.
: 230V± 5％, 50± 3 Hz
: 25°C ± 2°C
: 50% ± 10%
: 1366x768, 60 Hz ,all white
: Set to factory preset value, which allows that the brightest two of 32
linear distributed gray-scales (0～ 700mv) can be distinguished.
: Warm color
: Set to Factory preset value ( cut off raster)
: 0.7Vpp
: Factory preset value,
Refer to Accessories One about the value, Please.
40 cm for LCD performance, 20 cm for LCD failures
Dark room ＜ ＝1 cd/m2
: 0 ~ 0.7Vpp
: positive
: 75 Ohm
:85.5 MHz
Packed Monitor
442mm
328mm
130mm
3.7 kg