Advertisement
Multi-point function
BLUETREK Crescendo supports multipoint technology, which allows you to use one
headset with two different Bluetooth mobile phones. Please see the instructions as below:
Enable the multi-point function
1. Pair the headset to the mobile A (Please refer to "pairing" section).
2. Long press the Vol + and the Vol - button together on the headset under stand-by mode,
when heard a "beep", release the buttons and you will hear "Multi-point on" prompt to
finish, the multi-point function will be enabled.
3. Press Main button and the Vol - button together to reset the hardware, the headset will
turn off automatically.
4. Press and hold the Main button for about 5 seconds to enter into pairing mode, then pair
it to the mobile B.(Please refer to "pairing" section).
5. Turn off and turn on again the headset. The 2 mobiles will be connected automatically.
BLUETREK CRESCENDO I 5
Advertisement
