Advertisement
Multi-point function
Multipoint technology which allows you to use one headset with two different Bluetooth
mobile phone simultaneity. Please see the instructions as below:
Enable the multi-point function
1. Pair the headset to the mobile A (Please refer to "pairing" section).
2. Long press the Vol + and the Vol - button together on the headset under stand-by mode,
when heard a "beep", release the buttons and you will hear "Multi-point on" prompt to
finish, the multi-point function will be enabled.
3. Press Main button and the Vol - button together to reset the hardware, the headset will
turn off automatically.
4. Press and hold the Main button for about 5 seconds to enter into pairing mode, then pair
it to the mobile B.(Please refer to "pairing" section).
5. Turn off and turn on again the headset. Two mobiles will be connected with the headset
automatically.
6 I BLUETREK CRESCENDO
Advertisement
