Advertisement
Setting menu
Under setting menu, you can set.
"Say a command prompt "- Enables or Disables the "Say a command prompt". With it
disabled, you will hear a beep instead of voice command.
∙ Incoming call announce - Enables or Disable the Incoming call ID prompt and voice
answer functions (this function may not available on some phones).
∙ Save favorite - A phone number can be saved on the headset after you received an incoming call.
∙ Voice control help
∙ Turn off voice control - Turns off the voice control. To re-enable, hold the "Vol+" and
"Vol-" button simultaneously for about 6 seconds.
Reset the Crescendo headset
If the headset fail to communicate or any abnormal behavior, you may need to reset your
headset. Reset the headset will deletes all pairing information, reset the voice interface and
reboot headset back to pairing mode.
To reset your headset, press main button together with "Vol +" for 6 sec until the red LED flashes.
BLUETREK CRESCENDO I 7
Advertisement
