Advertisement
Mobile without voice recognition
. Make sure both the headset and the mobile phone are ON and in stand-by mode.
. Dial the number on the phone keypad, after approximately 2 seconds the audio
connection will be established.
This function may not be available on some phones, please refer to the trouble shooting
frequent asked questions in our website: www.bluetrek.com. to find out more.
Answering a call
When the headset rings, press once on the TALK button to take the call.
Ending a call
Press once on the TALK button to end an active call.
Adjusting the volume
To increase the volume during an active call, press the "VOL+" button on the headset.
To decrease the volume during an active call, press the "VOL-" button on the headset.
Muting the microphone
To mute the microphone during an active call
During an active call, press and hold the VOL+ button for approximately 2 seconds.A
periodic tone can be heard in the speaker when the microphone is muted.
To end the mute function
When the microphone is muted quickly press the VOL+ button on the BLUETREK® E2.
The periodic tone will end.
® E2
Transferring a call from BLUETREK
to the mobile phone
During an active call, press the TALK button for about 2 seconds.
(This function only works in the Hands-Free Profile.)
In the Headset profile, you can simply turn off your headset.
Transferring a call from the mobile phone to the BLUETREK® E2
During an active call on the mobile phone, press the TALK button for approximately 2
seconds until you hear the beep.
Call waiting
When you hear a call waiting alert while you are on a call, press once on the TALK
button to accept the second call.
This function may not be available, depending on your phone's functionality. However,
you can always answer the second call from your phone keypad.
Multi Pairing
BLUETREK® E2 can be paired to two mobile phones.
PAGE 5 / 5
Advertisement
