9244299_6265_en_au_oth.fm Page 9 Wednesday, October 26, 2005 11:07 AM
"Enhancement settings", p. 70 for
information.
1. Plug the headset connector into
the Pop-Port™ connector at the
bottom end of your phone.
appears on the display.
2. Position the headset on your ear.
With the headset connected, you can
make, answer, and end calls as usual.
• Use the keypad to enter numbers.
• Press the call key to place a call.
• Press the end key to end a call.
You can also plug a compatible
headset, such as the HS-9 Universal
Headset, into the 2.5 mm headset jack
on the side of your phone to allow
hands-free operation. See
"Enhancement settings", p. 70.
Warning: When you use the
headset, your ability to hear
outside sounds may be
affected. Do not use the
headset where it can
endanger your safety.
Make calls
Using the keypad
1. Enter the phone number, and press
the call key. To delete a character
to the left of the cursor, select
Clear.
S e t u p y o u r p h o n e
2. To end the call, press the end key.
To cancel the call attempt, select
End
call.
Use the save contact option
1. In standby mode, enter the phone
number and select Save, enter a
name for the contact, and select
OK.
2. To make the call, press the call key.
To return to standby mode, select
Done.
Use the contacts list
1. In standby mode, scroll down to
display your contacts.
2. Scroll to the contact you wish to
dial, press the call key. To view
details of the entry, select Details.
Use the last dialled number
1. In standby mode, press the call key
to display the last 30 numbers
dialled.
2. Scroll to the number or name you
wish to redial, and press the call
key.
Make a conference call
This service is network dependent.
1. Make a call to the first participant.
2. With the first participant on the
line, select
Options
>
New
call.
9