Introducing The Charger; Important Safety Instructions - Guest 2606a Owner's Manual

1. INTRODUCING THE CHARGER

The GUEST MTC 2606A is designed to both recharge your battery, and extend your
battery's life in applications where it is stored for long periods of time. The 2606A is a
"3-stage" electronic battery charger. Rainproof, lightweight, silent, completely
automatic, and reverse polarity protected, it produces 12 Volts DC at a full 6 Amps,
while using much less AC current than older chargers. Unlike automotive "trickle"
chargers, the 2606A will not boil off the electrolyte in properly installed and maintained
batteries. When the 2606A is attached to your battery and plugged into a standard
115 Volt / 60 Hz AC outlet, the red and green LED's let you know the unit is recharging
and maintaining your battery. This sophisticated device is ideal for recharging and
maintaining the 12VDC battery in your boat, electric vehicle or cart, ATV, snowmobile
or motorcycle.

2. IMPORTANT SAFETY INSTRUCTIONS

This manual contains important safety and operating instructions for the charger.
Read the entire manual before using. Also read all instructions and cautions for and
on the charger, batteries and equipment in the vicinity of the batteries.
WARNINGS
THIS CHARGER SHOULD BE USED TO CHARGE ONLY 12VOLT DC LEAD ACID
OR GEL CELL TYPE BATTERY SYSTEMS. USE ON OTHER THAN A 12 VDC
SYSTEM CAN CAUSE THE BATTERY TO EXPLODE AND CAUSE PERSONAL
INJURY.
RISK OF EXPLOSIVE GASES! WORKING IN THE VICINITY OF A LEAD ACID
BATTERY IS DANGEROUS. A BATTERY GENERATES EXPLOSIVE GASES
DURING NORMAL OPERATION. THEREFORE IT IS OF UTMOST IMPORTANCE
THAT EACH TIME BEFORE USING YOUR CHARGER YOU FOLLOW THE
INSTRUCTIONS EXACTLY.
2