Product Overview; Safety Precautions; Introducing The Charger - Guest Cruising Charger 2632A Owner's Manual

1. INTRODUCING THE CHARGER

The Guest model 2632A, and 2633A are designed to recharge your batteries, and
extend your battery's life in applications where it is stored for long periods of time.
They are "3-stage" electronic, lightweight, silent, completely automatic battery chargers.
Each output produces 12 Volts DC at a full 5 Amps, 10, or 20 Amps (model specific),
while using much less AC current than other charger types. Unlike automotive "trickle"
chargers, the 2632A, and 2633A will not boil off the electrolytes in properly installed
and maintained batteries. The red and green LED's, mounted on the charger face let
you know the unit is recharging and maintaining your batteries. This sophisticated
device is ideal for recharging and maintaining the 12VDC batteries in your boat, electric
vehicle or cart, ATV, snowmobile or motorcycle.
THIS CHARGER SHOULD BE USED TO CHARGE ONLY LEAD ACID, AGM, OR
GEL CELL TYPE BATTERIES. USE ON OTHER BATTERY TYPES MAY CAUSE
AN EXPLOSION OR PERSONAL INJURY.
RISK OF EXPLOSIVE GASES! WORKING IN THE VICINITY OF LEAD ACID
BATTERIES IS DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES
DURING NORMAL OPERATION. THEREFORE IT IS OF THE UTMOST
IMPORTANCE THAT EACH TIME BEFORE USING YOUR CHARGER YOU
FOLLOW THE INSTRUCTIONS EXACTLY.
Personal Safety Precautions
Adhere to the following personal safety precautions when installing or working with the
chargers:
Someone should be within voice range or close enough to come to your aid when
1.
you work near a lead-acid battery.
Have plenty of fresh water and soap nearby in case battery acid contacts skin,
2.
clothing, or eyes.
SAVE THESE INSTRUCTIONS
WARNINGS
2