Philips RQ1285CC User Manual page 61

Replacement
For maximum shaving performance, we advise you
to replace the shaving unit every two years.
Only replace the shaving unit with an original RQ12
MINUTES LEFT MINUTES LEFT
Philips Shaving unit.
1
Note: The displays of the different types look different,
but show the same symbol.
2
Note: Do not twist the shaving unit while you pull it off
the shaver.
2 2
3
1 1
4
10 sec. 10 sec.
Note: If you do not reset the shaver at the first
replacement reminder, it continues to beep (specific
types only) and show the shaving unit symbol at 8
more shaves (specific types only) or until you reset the
shaver (specific types only).
Note for RQ129x: You do not need to reset the shaver.
After 3 shaves, the replacement reminder (flashing
shaving unit symbol and beeping) is deactivated
automatically.
The shaving unit symbol flashes (all types) and
you hear a beep (RQ129x/RQ128x only) when
you switch off the shaver .
Pull the old shaving unit straight off the shaver.
Insert the lug of the new RQ12 shaving unit
into the slot in the top of the shaver (1). Then
press down the shaving unit (2) to attach it to
the shaver ('click').
RQ128x/RQ127x/RQ126x/RQ125x: To reset
the shaver, press and hold the on/off button for
approx. 10 seconds.
60
English