Philips RQ1285CC User Manual page 48

English
2 2
1 1
The display lights up for a few seconds.
,
3 Slide the trimmer slide forwards to slide out
the trimmer.
4 You can now start trimming.
5 Slide the trimmer slide backwards to retract
the trimmer.
6 Press the on/off button once to switch off the
shaver.
The display lights up for a few seconds and
,
shows the remaining battery capacity.
7 Insert the lug of the shaving unit into the slot
in the top of the shaver (1). Then press down
the shaving unit (2) to attach it to the shaver
('click').
Using the Beard Styler attachment (specific
types only)
1 Make sure the shaver is switched off.
2 Pull the shaving unit straight off the shaver.
Note: Do not twist the shaving unit while you pull it off
the shaver.
3 Insert the lug of the Beard Styler
attachment into the slot in the top of the
shaver (1). Then press down the beard styler
attachment (2) to attach it to the shaver
('click').
Using the Beard styler attachment with
comb
You can use the Beard Styler attachment with the
comb attached to style your beard at one fixed
47