Installation
6.
Connect cables.
•
Connect the power cord to the AC adaptor.
•
Connect the AC adaptor to the scanner.
•
Plug into the AC outlet.
•
Connect the USB cable to the scanner and to
your computer.
Note
•
Use only with the power cord and the AC
adaptor enclosed with the unit.
•
Use the USB cable enclosed with the unit.
•
When the unit is not used over an extended
period of time, turn the unit off, and unplug
the power cord. The power consumption is
approximately 0.3 W when the unit is turned
off, and the AC adaptor is connected to the
AC outlet.
B
A
C
AC adaptor
Power cord
To AC outlet
To computer
USB cable
14
Installation Manual
E
D
7.
Install the software (Page 16).
8.
Press the power key to turn ON the scanner power.
•
The LED (Green) will blink, and then it will
become steady.
Power key
LED (Green)