Professional & designer freestanding refrigeration side trim, side panel, top panel & grille installationfrench door bottom mount with dispenser (4 pages)
Viking Installation Guide Viking Range Corporation 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-VIKING1 (845-4641) or visit the Viking Web site at vikingrange.com Built-In Refrigeration Top Grille Installation (Dual Installation) F20549 EN (070210)
Table of Contents IMPORTANT– Please Read and Follow! • Make sure that incoming voltage is the same Your safety and the safety of others is as unit rating. An electric rating plate Warnings & Important Information___________________________________________________________ 3 very important. specifying voltage, frequency, wattage, General Information _________________________________________________________________ 6 amperage, and phase is attached to the We have provided many important safety...
Page 3
• make sure that you have these materials (not provided with your unit), which are necessary • Viking Range Corporation will NOT warranty any problems resulting from GFI outlets which for proper installation: are not installed properly or do not meet the requirements below.
(1.9 L) of water through the copper tubing walls that can obstruct unit installation. a qualified electrician if you are not sure the • The installation of Viking units with a and into a bucket to remove any particles • Cutout dimensions are accurate.
Grille Removal General Information • Most of the unit’s weight is at the top. TIP OVER HAZARD Extra care is needed when moving the unit Appliance is top heavy and tips easily when to prevent tipping. not completely installed. Keep doors closed •...
Cutout Dimensions Anti-Tip Dimensions Dual 30” Professional & Professional Integrated Dual 30” Professional & Professional Integrated Electric Outlet Location Professional Anti-Tip Location 6 ” (1 5 .2 c m ) Two 2”x 4” mounting boards per unit 9 ” 3” (7.6 cm) x 3–1/2” (8.9 cm) 9 ”...
Cutout Dimensions Anti-Tip Dimensions Dual 30” & 36” Professional & Professional Integrated Dual 30” & 36” Professional & Professional Integrated Electric Outlet Location Professional Anti-Tip Location 6 ” (1 5 .2 c m ) 9 ” 9 ” Two 2”x 4” mounting boards per unit (2 2 .9 (2 2 .9 c m )
Cutout Dimensions Anti-Tip Dimensions Dual 36” Professional & Professional Integrated Dual 36” Professional & Professional Integrated Electric Outlet Location Professional Anti-Tip Location 6 ” (1 5 .2 c m ) Two 2”x 4” mounting boards per unit 3” (7.6 cm) x 3–1/2” (8.9 cm) 9 ”...
Side Trim Installation - Side Trim Installation - Professional & Professional Integrated Models Professional & Professional Integrated Models • Remove cabinet side trim mounted on the left hand side of the refrigerator to be installed • Engage the right hand refrigerator’s left side trim into the “J” shaped portion of the left side on the right side of the installation.
Grille Assembly Bracket Placement - Grille Assembly Install - Professional & Professional Integrated Models Professional & Professional Integrated Models For 66” grille, excluding Custom Panel, Add/Remove brackets to full length grille as required. • Remove center grille blade by lifting up and pulling forward. See illustration below.
Side Trim Installation - Side Trim Installation - Designer & Custom Panel Models Designer & Custom Panel Models • Remove cabinet side trim mounted on the left hand side of the refrigerator to be installed • Engage the right hand refrigerator’s left side trim into the “J” shaped portion of the left side on the right side of the installation.
Page 21
Grille Assembly Bracket Placement - Grille Assembly Install - Designer Models Designer Models For 66” grille, excluding Custom Panel, Add/Remove brackets to full length grille as required. • Remove center grille blade by lifting up and pulling forward. See illustration below. •...
Grille Assembly - Grille Assembly Bracket Placement - Custom Panel Models Custom Panel Models On Custom Panel models, grill spacers from original unit grilles must be reused: • Remove grille brackets from grille included in the grille kit by removing 4 screws on each For 66”...
Page 23
Grille Assembly Install - Custom Panel Models • Remove center grille blade by lifting up and pulling forward. • Insert grille into refrigerators. Screw grille assembly into units with (4) screws removed in Step 3 (See Grille Removal Section).