Table of Contents
Advertisement
Grille Assembly Bracket Placement -
Designer Models
For 66" grille, excluding Custom Panel, Add/Remove brackets to full length grille as required.
See illustration below.
66" Designer Grille
(back view)
TOP
Use this bracket if 36" W. product is
on right side (facing unit), otherwise
remove.
Use this bracket if 30" W. product is
on right side (facing unit), otherwise
remove.
*NOTE: Depending on unit configuration, two brackets should be removed and discarded. The
72" W. and 60" W. grille assemblies have all four (4) brackets mounted in the proper location.
40
Use this bracket if 30" W. product is
on left side (facing unit), otherwise
remove.
Use this bracket if 36" W. product is
on left side (facing unit), otherwise
remove.
Grille Assembly Install -
Designer Models
•
Remove center grille blade by lifting up and pulling forward.
•
Insert grille into refrigerators. Screw grille assembly into units with (4) screws removed in
Step 3 (See Grille Removal Section).
41
Advertisement
Table of Contents
