Toyota AVALON Hybrid Dismantling Manual page 27

15. REMOVE REAR SEAT CUSHION
ASSEMBLY
(1) Disengage the 2 hooks on the front side of the
rear seat cushion assembly from the vehicle
body as shown in the illustration.
a)
Choose a hook to disengage first. Place
your hands near the hook as shown in the
illustration. Then lift the rear seat cushion
to disengage the hook.
b)
Repeat the step above for the other hook.
(2) Pass the buckle of the rear seat inner with
center belt assembly LH and buckle of the rear
seat inner with center belt assembly RH
through the slit of the rear seat cushion assembly.
(3) w/ Seat Heater System:
a)
Disconnect the 2 seat heater assembly connectors.
(4) Remove the rear seat cushion assembly.
16. REMOVE REAR SEATBACK ASSEMBLY
(1) Disconnect the rear seat outer belt assembly
LH from the rear seat shoulder belt guide LH.
(2) Disconnect the rear seat outer belt assembly
RH from the rear seat shoulder belt guide RH.
a
*1: Rear Seat Inner with Center Belt Assembly LH
*2: Rear Seat Inner with Center Belt Assembly RH
a: 100 mm (3.94 in.) or less
23
*1
*2