Table of Contents
Advertisement
4. Remove the service plug grip.
Caution:
Wear insulated gloves for the following 3 steps.
(1) Slide the handle of the service plug grip to the right.
(2) Raise the release handle of the service plug grip.
(3) Remove the service plug grip.
(4) Apply insulating tape to the socket of the service plug grip to insulate it.
5. Carry the removed service plug grip in your pocket to prevent other staff from accidentally
reinstalling it while you are dismantling the vehicle.
6. Make other staff aware that a high-voltage system is being dismantled by using the
following sign: CAUTION: HIGH-VOLTAGE. DO NOT TOUCH. (see page 18).
7. If the service plug grip cannot be removed due to damage to the vehicle, remove the IG2
MAIN fuse (25A).
Caution:
This operation shuts off the HV system. Be sure to wear insulated gloves because
high voltage is not shut off inside the HV battery. When it is possible to remove
the service plug grip, remove it and continue the procedure.
16
IG2 MAIN
Fuse
Hide quick links:
Advertisement
Table of Contents
