Control Panel Operation - Epson EPL-N2500 Quick Reference Manual

Control Panel Operation

The control panel is made up of three
elements: a liquid crystal display (LCD)
panel, indicator lights, and buttons. The
LCD panel and indicator lights tell you the
current status of the printer, and you can use
the control panel buttons to make printer
settings, check consumable products, and
print status sheets. However, settings made
in your application and in the printer driver
usually override settings made at the control
panel.
1. LCD panel Displays printer status
messages and control panel
menu settings.
Back button
2. Use these buttons to access the
3. Up button control panel menus, where
4. Enter button you can make printer settings
5. Down button and check the status of
consumable products. For
instructions on how to use
these buttons, see "How to
access the control panel
menus."
EPSON EPL-N2500 Quick Reference
6. Cancel Job Press once to cancel the current
button print job.
Press and hold for more than
two seconds to delete all jobs
from the printer memory,
including jobs the printer is
currently receiving, saving to
the Hard Disk Drive, or
printing.
7. Error light On or flashes when an error has
(Red) occurred.
8. Ready light On when the printer is ready,
(Green) indicating that the printer is
ready to receive and print data.
Off when the printer is not
ready.
9. Start/Stop When the printer is printing,
button pressing this button stops the
printing.
When the error light is
flashing, pressing this button
clears the error and switches
the printer to ready status.
10.Data light On when print data is stored in
(Yellow) the print buffer (the section of
printer memory reserved for
receiving data) but not yet
printed.
Flashes when the printer is
processing data.
Off when no data remains in
the print buffer.
Control Panel Operation (1/2)