Setting A Boot Password - Samsung NP-RF410E User Manual

Setting a Boot Password

When setting a password, you have to enter a password to use the
computer or enter the BIOS Setup.
By confi guring a password, you can restrict system access to
authorized users only and protect data and fi les saved on the
computer.
• Do not lose or forget your password.
• If you have forgotten your password, contact a Samsung
service center. In this case, a service fee will be charged.
• The screen images and terms may diff er from actual
product depending on the computer model and driver
version.
Setting a Supervisor Password
A Supervisor Password is required to turn the computer on or to
start the System Setup.
When setting a Supervisor Password, users other than a supervisor
cannot use the computer.
1
Select the Security menu in the BIOS Setup.
2
In the Set Supervisor Password item, press <Enter>.
3
Enter a password, press <Enter>, re-enter the password for
confi rmation, and press <Enter> again.
The password can be up to 8 alphanumeric characters.
Special characters are not allowed.
4
The supervisor password has been set.
The supervisor password is required to turn the computer on
or to enter the BIOS Setup.
For some models, if the password entered message appears
in the Setup Notice window, the settings are not complete
until the <Enter> key is pressed.
Chapter 3.
Settings and Upgrade
XXXXXXXX
92