Table of Contents
Advertisement
Connecting an External Display Device
Connecting through the HDMI port (Optional)
By connecting the computer to a TV with a HDMI port, you can
enjoy both a high visual quality and a high sound quality.
After connecting a TV through HDMI, you have to confi gure the
screen and sound.
1
Connect the HDMI cable to the HDMI port of the TV.
External
Monitor
•
This is only supported for models that support a TV output
port (HDMI).
•
When a TV provides more than one HDMI port, connect
the computer to the DVI IN port.
•
When connecting the computer to a TV, switch the
external input mode of the TV to HDMI.
TV
Projector
2
Press the
+
Display Manager screen appears where you can select a
display device.
Since pressing the
changes the selection, select a display device.
HDMI
LCD + HDMI Clone
LCD + HDMI DualView
•
External Monitor / TV is not supported in the DOS
Command Prompt window.
•
If the screen is not switched even if you press the
key combination, you have to install the Easy
+
Display Manager program.
•
Simultaneous output to LCD+CRT+HDMI is not supported.
However, the 3D model supports simultaneous output
to LCD+CRT+HDMI. 3D mode is available in either LCD or
HDMI single screen. 3D mode may not work depending on
the 3D external display device connected through HDMI or
the software environment.
Chapter 2.
Using the computer
key combination once. Then the Easy
key while holding down the
54
key
Advertisement
Table of Contents
