Table of Contents
Advertisement
HCD-GNX600
• Display when an error occurred (CD Error Code Mode)
Procedure:
1. Press x button, [ILLUMINATION/SUB WOOFER
LEVEL] button and [DISC 1] button simultaneously to
enter the error code display mode.
2. The fluorescent indicator tube displays the number of total
error.
3. Each time m or M button is pressed, display change as
below.
Display of total error
M
Display of Mechanical errors
>
direction
M
Display of no disc errors
>
direction
4. To clear the error record, operate the cold reset. (Refer to the
"COLD RESET")
5. To release from this mode, press the
disconnect the power plug.
1) Display of total error
Display
EM**ED**
EM**: The number of mechanical errors.
ED**: The number of no disc errors after chucking the disc.
2) Display of mechanical errors
Display
M*$$%%&&##00
M*: The number of mechanical error ("00" is latest one)
(Rotate
knob in the direction of either to display next
.
>
error)
$$: Not used
%%: Loading related error (Second figure is not used)
D: Stop by the problem other than mechanical problem while
closing.
E: Stop by the problem other than mechanical problem while
opening.
C: Stop by the problem other than mechanical problem while
chucking up.
F: Stop by the problem other than mechanical problem while
chucking down.
&&: Emerging error
01: Stop while chucking up.
02: Stop while chucking up.
03: Time-out of EX-CHANGE open.
05: Time-out of EX-CHANGE close.
##: Not used
18
D*: The number of no disc error ("00" is latest one)
(Rotate
error)
$$: Error type
m
.
direction
%%: Not used
m
&&:
.
direction
##: The state when judged as no disc
button or
?/1
[CD REPEAT 5 LIMIT OFF MODE]
Procedure:
[CD SHIP MODE (WITH MEMORY CLEAR)]
Procedure:
3) Display of no disc errors
Display
D*$$%%&&##00
.
>
knob in the direction of either to display next
01:
Focus error
02:
GFS error
03:
Setup error
00:
No disc judgment without chucking retry.
01:
No disc judgment after chucking retry.
01:
Stop
02:
Setup
03:
TOC reading
04:
Access
05:
Playback
06:
Pause
07:
Manual search (Play)
08:
Manual search (Pause)
• The number of repeat for CD playback is 5 times when the
repeat mode is "REPEAT ALL". This mode enables CD to
repeat playback for limitless times.
1. Press
button to turn on the set.
?/1
2. Select CD function.
3. Press x button, [CD] button and [DISC 1] button
simultaneously to enter the CD repeat 5 limit off mode and
the fluorescent indicator tube displays "LIMIT OFF".
4. To release from this mode, operate the cold reset. (Refer to
the "COLD RESET")
• This mode moves the optical pick-up to the position durable
to vibration and clears all data including preset data stored in
the RAM to initial conditions. Use this mode when returning
the set to the customer after repair.
1. Press
button to turn on the set.
?/1
2. Select CD function.
3. Press x button, [DIRECTION] button and
simultaneously. The set will turn off automatically.
4. After the "STANDBY" blinking display finishes, a message
"MECHA LOCK" is displayed on the fluorescent indicator
tube and the CD ship mode is set.
button
?/1
Hide quick links:
Advertisement
Table of Contents
