Gs748At Front Panel; Back Panel - NETGEAR GS700AT Series Hardware Installation Manual

GS700AT Hardware Installation Guide

GS748AT Front Panel

The GS748AT is a 48-Ports 10/100/1000M + 4 SFP Combo ports Smart switch. Every RJ45 port is
capable of sensing the line speed and negotiating the operation duplex mode with the link partner
automatically.
Figure 3-2 illustrates the NETGEAR GS748AT Smart Switch front panel.
Figure 3-2
The front panel contains the following:
• 48 RJ-45 connectors for 10/100/1000Mbps auto sensing Gigabit Ethernet switching ports.
• Four SFP slots for SFP modules supporting 1000 (1000Base-SX/LX)/100M SFP.
• Reset button to restart the device.
• Recessed default reset button to restore the device back to the factory defaults.
• Port LEDs.
• System LEDs.

Back Panel

Figure 3-3 illustrates the NETGEAR GS700AT Smart Switch back panel:
Figure 3-3
The back panel contains the following:
• A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for
accommodating the supplied power cord.
3-2
v1.0, October 2008
Physical Description