Basic Call Features; Answering A Call; Call Mute And Un-Mute - Yealink SIP-t28p Quick Start Manual

E
N

Basic Call Features

G
Placing a Call
L
Using the handset:
I
1. Pick up the handset.
S
2. Enter the number, and then press the Send soft key.
H
Using the speakerphone:
1. With the handset on-hook, press
2. Enter the number, and then press the Send soft key.
Using the headset:
1. With the headset connected, press
2. Enter the number, and then press the Send soft key.
Note: During a call , you can alternate between headset, hands-free speakerphone and handset modes by
pressing the Headset key or the Speakerphone key or picking up the handset. Headset mode requires a
headset connected.

Answering a Call

Using the handset:
Pick up the handset.
Using the speakerphone:
Press .
Using the headset:
Press .
Note: You can ignore an incoming call by pressing the Reject soft key.
Ending a Call
Using the handset:
Hang up the handset or press the Cancel soft key.
Using the speakerphone:
Press or the Cancel soft key.
Using the headset:
Press the Cancel soft key.
Redial
Press to enter the Dialed Calls list, press
or the Send soft key.
Press twice when the phone is idle to call the last dialed number.

Call Mute and Un-mute

Press to mute the microphone during a call.
Press again to un-mute the call.
Call Hold and Resume
To place a call on hold:
Press or the Hold soft key during an active call.
To resume the call, do one of the following:
If there is only a call on hold, press
4
.
to activate the headset mode.
or to select the desired call, and then press
or the Resume soft key.