Overview Of Remote; Remote Battery Usage; Subwoofer Connection - Bush CBAR7W Installation & User's Instructions

User instructions

Overview of remote

17
19
20
VOL +
B -
21
22
23
17 PLAY/PAUSE: START or PAUSE Bluetooth
playback .
18 SOURCE: Select an audio source from TV, AUX,
COAX, BT or OPTICAL inputs .
19 STANDBY: Switch on the Sound bar or switch to
STANDBY mode .
20 SKIP : Skip to previous track for Bluetooth
playback .
21 VOLUME - / +: Increase or decrease the volume
output .
22 OPTION: Press and hold for 5 seconds to 'Unpair' a
connected Bluetooth device .
23 SLEEP: Activates the sleep timer function .
24 DIM: Press this button to adjust the display
brightness .
25 BASS - / +: Increase or decrease the bass output .
26 MUTE: Press to mute the sound output .
27 SKIP : Skip to next track for Bluetooth playback .
28 SOUND EQ MODES: Press repeatedly to assign
different sound EQ modes: STANDARD, MOVIE,
MUSIC or NEWS .
Page 4
18
28
27
26
25
B +
VOL -
24

Remote battery usage

Using the remote for the first time
Before use, pull the tab out from the bottom of the
remote control . This allows the terminals contact with
the pre-installed battery .
Installing batteries in the remote
1: Push open the battery compartment on the bottom of
the remote control using a fingernail .
2: Insert a CR2025 battery into the space taking care to
match the + & - polarity symbols correctly .
3: Replace the battery compartment .
Disposal of batteries
Dispose of used batteries with regard to the recycling
regulations in your area. Do NOT short circuit batteries
or throw them into water, the general rubbish or in a
fire. Weak batteries can leak and damage the remote
control. Replace them in good time!

Subwoofer connection

1: Connect the speaker cable from external subwoofer
to the socket on back of the Sound bar . Take care to
match the cable with RED line to the RED socket and
the WHITE cable to the BLACK socket .