Table of Contents
Advertisement
Installation Guide for the 9 dBi Omni-directional Antenna ANT2409
First, Assemble and Mount the Antenna
2-2
Step
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Figure 2-1: Antenna Assembly and Mounting
Installing the 9 dBi Omni-directional Antenna
Procedure
Feed the antenna cable through the antenna
mounting assembly.
Note: Use the correct cable.
• Outdoors: use the provided 2m antenna
cable.
• Indoors: use the provided N/SMA adapter
cable model
with a Netgear
ACC-10314-01, 02, 03, 04 or 05 (sold
separately). For indoors, d
provided 2m cable.
Securely attach the antenna cable by screwing
it onto the antenna.
Insert the antenna into the mounting assembly.
Position the key slot on the antenna so that it
is aligned with the mounting screw hole
illustrated in step 5.
Tighten the mounting screw so that it fits in the
key slot on the antenna.
Attach the assembled antenna to the mounting
surface with the appropriate hardware (U-bolts
for pole mount, L-bracket or no bracket for flat
mount).
Note: The antenna can be mounted vertically
right-side-up or up-side-down.
o not use the
Advertisement
Table of Contents
