Remove The C3-Board(50Inch); Remove The Speaker L, R; Remove The C3-Board(37, 42Inch) - Panasonic TH-37PX50U Service Manual

TH-37PX50U / TH-42PX50U / TH-50PX50U
6.29. Remove the C3-Board
(50inch)
1. Remove the fan.
2. Remove the flexible cables holder fastening screws (×8
) and disconnect the flexible cables (CA8~CA11).
3. Disconnect the flexible cable (C31) and disconnect the
couplers (C33, C35).
4. Remove the screws (×5

6.30. Remove the Speaker L, R

1. Remove the screw (×8
connector L, R.
2. Remove the Speaker L, R.
) and remove the C3-Board.
) and disconnect the relay
6.31. Remove the stand brackets.
1. Remove the plasma panel section from the servicing stand
and lay on a flat surface such as a table (covered), with the
plasma panel surface facing downward.
Spread a soft cloth or similar on the table for protection, so
the panel surface is not scratched.
2. Remove the stand bracket (left, right) fastening screws (×4
each) and remove the stand brackets (left, right).
6.32. Remove the C3-Board
(37, 42inch)
1. Remove the flexible cable holder fastening screws (×8), and
disconnect the flexible cables (CB5, CB6, CB7, CB8).
2. Disconnect the couplers (C33, C42, C44), and disconnect
the flexible cables (C31).
3. Remove the screws (×3
20
), and remove the C3-Board.