JVC KW-R920BT Instruction Manual page 24

AUDIO SETTINGS
Crossover settings
Below are the available setting items for 2-way
crossover and 3-way crossover.
Caution
Select a crossover type according to how the speakers
are connected. ( 29, 30)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or
low.
SPK SIZE (speaker size)
Selects according to the connected speaker size for
optimum performance.
• The frequency and slope settings are
automatically set for the crossover of the selected
speaker.
• If [NONE] is selected for [TWEETER] of [FRONT], [REAR]
and [SUBWOOFER] for [SPK SIZE], the [X ' OVER] setting
of the selected speaker is not available.
X ' OVER (crossover)
[FRQ]/ [HPF FRQ]/ [LPF FRQ]:
Adjusts the crossover frequency for the selected
speakers (high pass filter or low pass filter).
• If [THROUGH] is selected, all signals are sent to the
selected speakers.
[SLOPE]/ [HPF SLOPE]/ [LPF SLOPE]:
Adjusts the crossover slope.
• Selectable only if a setting other than [THROUGH]
is selected for the crossover frequency.
[PHASE]:
Selects the phase of the speaker output to be in
line with the other speaker output.
[GAIN LEFT]/ [GAIN RIGHT]/ [GAIN]:
Adjusts the output volume of the selected speaker.
20
2-way crossover setting items
SPK SIZE
FRONT SIZE
TWEETER
REAR * 1
8CM/ 10CM/ 12CM/ 13CM/ 16CM/ 17CM/ 18CM/ 4×6"/ 5×7"/ 6×8"/ 6×9"/ 7×10"/
NONE (not connected)
SUBWOOFER *
2
16CM/ 20CM/ 25CM/ 30CM/ 38CM OVER/ NONE (not connected)
X ' OVER
TWEETER FRQ
GAIN LEFT
GAIN RIGHT
FRONT HPF FRQ
SLOPE
GAIN
REAR HPF * 1
FRQ
SLOPE
GAIN
SUB.W LPF * 2
FRQ
SLOPE
PHASE
GAIN
* 1
Displayed only when [SPK/PRE OUT] is set to [REAR/REAR]. ( 19)
* 2
Displayed only when [SUB.W] is set to [ON]. ( 18)
8CM/ 10CM/ 12CM/ 13CM/ 16CM/ 17CM/ 18CM/ 4×6"/ 5×7"/ 6×8"/
6×9"/ 7×10"
SML/ MID/ LRG/ NONE (not connected)
1KHZ/ 1.6KHZ/ 2.5KHZ/ 4KHZ/ 5KHZ/ 6.3KHZ/ 8KHZ/
10KHZ/12.5KHZ
–08DB to 00DB
–08DB to 00DB
30HZ/ 40HZ/ 50HZ/ 60HZ/ 70HZ/ 80HZ/ 90HZ/ 100HZ/ 120HZ/
150HZ/ 180HZ/ 220HZ/ 250HZ/ THROUGH
–06DB/ –12DB/ –18DB/ –24DB
–08DB to 00DB
30HZ/ 40HZ/ 50HZ/ 60HZ/ 70HZ/ 80HZ/ 90HZ/ 100HZ/ 120HZ/
150HZ/ 180HZ/ 220HZ/ 250HZ/ THROUGH
–06DB/ –12DB/ –18DB/ –24DB
–08DB to 00DB
30HZ/ 40HZ/ 50HZ/ 60HZ/ 70HZ/ 80HZ/ 90HZ/ 100HZ/ 120HZ/
150HZ/ 180HZ/ 220HZ/ 250HZ/ THROUGH
–06DB/ –12DB/ –18DB/ –24DB
REVERSE (180°)/ NORMAL (0°)
–08DB to 00DB