Main Rotor Blade / 主旋翼安裝 - THUNDER TIGER x50 Instruction Manual

Main Rotor Blade / 主旋翼安裝
Bag KPI
No. Material No. Description
1 HMC4-27B
SOCKET SCREW,M4x27
2 HMM4Z NYLON NUT,M4
HMC4-27B
SOCKET SCREW,M4x27
內六角螺絲,M4x27
HMM4Z
NYLON NUT,M4
止鬆螺帽,M4
Qty
名稱
2
內六角螺絲, M4x27
2
止鬆螺帽, M4
1. You may need to adjust the linkage to ensure the blade tracking. Please refer
page 26, 〝Blade Tracking Adjustment.〞
2. Install the main blades with the Socket Screw (HMC4-27B). Do not over
tighten and ensure the blades run effortlessly.
3. For safety the rpm of using carbon blades should not exceed 2400.
1. 您可能必需調整相關的連桿來確保旋翼旋轉軌跡正常。請參閱第26頁〝主旋翼軌跡調
整〞說明。
2. 以內六角螺絲安裝上主旋翼。請勿過度鎖緊。
3. 安全起見，碳纖維主旋翼轉速請勿超過2400rpm。
(2)
-21-
(1)
(2)
Completed View
組裝完成