12.
Remove the 6 Phillips PM2.5x2.5 screws that secure the hinges to the display enclosure (3), and then
remove the display hinges from the display enclosure (4).
Display hinges are available in the Display Hinge Kit using spare part number 821166-001 for 14"
computers and 821187-001 for 15" computers.
13.
If it is necessary to replace the display/webcam cable, lift the display/webcam cable assembly (1 ) from
the routing (2) and disconnect the cable if needed (3).
The display cable is available in the Cable Kit using spare part number 821174-001 for 14" computers
and 821192-001 for 15" computers.
Reverse this procedure to reassemble and install the display assembly.
80
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts