2.
Position the computer upright with the front toward you.
3.
Open the computer as far as possible.
4.
Insert a screwdriver or similar thin tool into the hole beside the heat sink/fan assembly, and then press
on the back of the keyboard until it disengages from the computer (2). Rotate the top of the keyboard
upward, and then lift the keyboard up at an angle to disengage the tabs at the bottom of the keyboard.
NOTE:
pull the keyboard cables out of the system board connectors.
52
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Cables connect the bottom of the keyboard to the system board. Make sure not to prematurely