Panasonic SA-VK82DGCP Service Manual page 23

Item Operational Condition
and Key Function
Measurement of CD While
laser current electricity stopped and no disc is
inserted, press and hold
down the
on the player and the
number button "3" on the
remote controller unit.
Press
button for next page
User initialization While
stopped and no disc is
inserted, press and hold
down the
on the player and the
number button
on the remote controller
unit.
Region display While
stopped and no disc is
inserted, press and hold
down the
the player
number button, "6" on
the remote
unit.
Firmware version While
display stopped and no disc is
inserted, press and hold
down the
on the player and the
number button, "7" on
the remote
unit.
Press
button for next page
Region and firmware While
display stopped and no disc is
inserted, press and hold
down the
on the player and the
number button, "8" on
the remote
unit.
Laser use time While
stopped and no disc is
inserted, press and hold
down the
on the player and the
remote controller unit.
Press
button for next page
Reset laser use time While the usage time 1 is
displayed,
hold down
button on the player and
the
remote controller unit.
the player is Measurement of CD laser current
electricity
Measures CD laser current electricity
button and displays the result together with
the initialization
EEPROM. After measurement, CD
laser is lit till the power is turned off (or
goes off when the primary power is
"FL Display" turned off).
the player is User initialization
The user setting recovers the factory
setting.
button
the player is Region display
button on
and the
controller
the player is Firmware version display
button
controller
"FL Display"
the player is Region and firmware version display
button
controller
the player is Laser usage time
Measures each for DVD and CD
respectively.
button
button on the
"FL Display"
Laser usage time reset
press and Resets both for DVD and CD at once.
the
button on the
Details
*1
LDC /xxx
(display1/display2)
*1
: CD laser current electricity
value stored in measurement mode
*2
: Current electricity initialization
value stored in EEPROM
*3
: Present value of current
electricity
Values are shown in the decimal
digit. The above example indicates
the current electricity initialization
value is 28mA and its present
value is 26mA when laser is turned
on.
"INIT"
[s rr zzz]
s : Panecon model type
rr : Panecon release number
zzz: Syscon release number
*1 *2
rrr xx
*1
: Panel computer release number
*2
: System computer generation
*3
: System computer model type
*4
: System
number
*1 *2
x y z
*1
: Region number
*2
: System computer generation
*3
: System computer model type
*4
: System
number
T1_ _1234/5678
(display1/display2)
The numbers in the left show
usage time for DVD laser and
those in the right for CD laser. The
four-digit number is shown by the
ten hours in the decimal digit. The
number after 0000 is 9999.
T1_ _0000/0000
(display1/display2)
23
SA-VK82DGCP / SA-VK82DGCS / SA-VK82DGS
Display
*2 *3
yyyy Automatically exits
the mode after five
seconds.
Automatically exits
the mode after five
seconds.
Automatically exits
the mode after five
seconds.
*3 *4
y zzz Automatically exits
the mode after five
seconds.
computer release
*3 *4
w Automatically exits
the mode after five
seconds.
computer release
Automatically exits
the mode after five
seconds.
Automatically exits
the mode after five
seconds.
TO Exit Mode