Adjusting The Clock; Safety Block - Teka TMW 22.1 BIT Operation Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 38

Adjusting the Clock

How to Proceed
How to Proceed
How to Proceed
How to Proceed
1. 1. 1. 1. Press the CLOCK key (11
2. 2. 2. 2. Enter the time value by turning the ROTARY control (9 9 9 9 ) in either of the two
directions.
3. 3. 3. 3. Press the CLOCK key (11
4. 4. 4. 4. Enter the minutes value by turning the ROTARY control (9 9 9 9 ) in either of the two
directions.
5. 5. 5. 5. Press the CLOCK key (11

Safety Block

How to Proceed
How to Proceed
How to Proceed
How to Proceed
1. 1. 1. 1. Oven operation may be blocked (for example, to prevent it from being used by
children) by pressing the STOP key (14
the oven will beep and the Screen (1 1 1 1 ) will display four lines and oven operation
will be blocked.
2. 2. 2. 2. The clock may be displayed at any time by pressing the START key (15).
3. 3. 3. 3. To unblock the oven, press the START key (15
this time, the oven will beep and the Screen (1 1 1 1 ) will display the clock again.
11) until the digits start to flash.
11
11
11) now adjust the minutes value.
11
11
11) to end.
11
11
14) for three seconds. At the end of this time,
14
14
15) for three seconds. At the end of
15
15
Screen (1)
Screen (1)
Screen (1)
Screen (1)
2 4 : 0 0
Screen (1)
Screen (1)
Screen (1)
Screen (1)
- - : - -
2 4 : 0 0
2 4 : 0 0
47

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TMW 22.1 BIT and is the answer not in the manual?

Questions and answers

jose vazquez garcia
March 2, 2025

Como sacar el microondas empotrado para reparar?

User image 67c49f0d597c5
1 comments:
Mr. Anderson
March 2, 2025

To remove the Teka TMW 22.1 BIT built-in microwave for repair:

1. Unplug the Microwave – Ensure the appliance is disconnected from the power supply.
2. Remove Packing Materials – If applicable, take out any packing materials and accessories from the oven cavity.
3. Check Installation – The microwave is recommended to be installed in a unit with an upper ventilation opening.
4. Ensure a Stable Surface – Place the microwave on a flat, stable surface that can support its weight once removed.
5. Carefully Pull Out the Microwave – If installed in cabinetry, gently slide or lift the microwave out from its enclosure.

If you find any faults or issues, avoid using the microwave and contact your dealer or a qualified technician for further assistance.

This answer is automatically generated

Table of Contents

Save PDF