Table of Contents
Advertisement
Available languages
Available languages
Installation Instruction
Remove oven from packing
Remove all packing materials and accessories from the oven cavity.
Check whether the following parts are in good condition:
Door and hinges;
Front of the oven;
Inside and outside of oven.
Should you find any faults DO NOT USE THE OVEN, and contact your dealer.
Place the oven on a flat stable surface able to support its weight.
To allow efficient cooling of the microwave, its installation is recommended in a unit with an opening in the
upper part (refer to the installation instructions leaflet enclosed).
The oven should be kept away from heat and vapour sources (electric oven, toasters, etc.).
The oven has been supplied with a mono-phase power supply cord. The appliance must be earthed.
The manufacturers and dealers are not liable for any breakdowns or personal accidents should these
installation instructions not be observed by the purchaser.
WARNING:
WARNING:
WARNING:
WARNING:
THIS APPLIANCE MUST BE EARTHED.
THIS APPLIANCE MUST BE EARTHED.
THIS APPLIANCE MUST BE EARTHED.
THIS APPLIANCE MUST BE EARTHED.
38
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the TMW 22.1 BIT and is the answer not in the manual?
Questions and answers
Como sacar el microondas empotrado para reparar?
To remove the Teka TMW 22.1 BIT built-in microwave for repair:
1. Unplug the Microwave – Ensure the appliance is disconnected from the power supply.
2. Remove Packing Materials – If applicable, take out any packing materials and accessories from the oven cavity.
3. Check Installation – The microwave is recommended to be installed in a unit with an upper ventilation opening.
4. Ensure a Stable Surface – Place the microwave on a flat, stable surface that can support its weight once removed.
5. Carefully Pull Out the Microwave – If installed in cabinetry, gently slide or lift the microwave out from its enclosure.
If you find any faults or issues, avoid using the microwave and contact your dealer or a qualified technician for further assistance.
This answer is automatically generated