Advertisement
HOW TO OPERATE
Make sure the Deep Fryer is UNPLUGGED.
1.
Remove the frying basket and make sure the handle is swung out
and locked.
2.
Use only good quality frying oil such as Peanut oil, Vegetable oil,
pure Corn oil, Sunflower oil, Canola oil, or Light Olive oil.
(Recommended not to mix oil)
3.
Fill oil into the oil container approximately between the MIN
marking and the MAX marking.
4.
Do not fill over the MAX marking or fill lower than the MIN
marking.
5.
Make sure the temperature control knob is set to the 'OFF' or
'0' position.
6.
Connect the magnetic power cord to the back of the control box
properly. Make sure the connection is right-side-up that it is
properly secure.
7.
PLUG the power cord into an outlet.
8.
Move the Thermostat knob to desired temperature setting or
according to the particular recipe you are using. The RED &
GREEN indicator light will turn on.
9.
While oil is preheating, prepare the food that is going to be fried.
10. When placing the food into the basket, make sure it is as dry
as possible. Do not add water, ice or wet food, it may cause
HOT OIL SPLATTER.
11. When frying Frozen food, clear off any ice particles and thaw food
thoroughly.
12. Do not overfill the basket.
13. When the temperature has been reached, the RED indicator light
will shut OFF; the fryer is ready to fry food.
14. Lower basket of food into hot oil and cover fryer w/ lid.
15. Remove food after desired cooking time has elapsed.
16. Take care to remove food before it starts soaking up too much oil.
WARNING: DO NOT TOUCH THE CONTROL KNOB WHEN THE
FOOD IS FRYING. HOT STEAM MAY BE ESCAPING AND CAN
CAUSE BODILY HARM.
10
6
Ginnys.com • 1.800.544.1590
RESETTING YOUR FRYER
OPERATING INSTRUCTIONS
RESET BUTTON:
1.
If your deep fryer's heating elements shut off in the middle of frying
and does not come back on, unplug the unit and allow it to cool off up
to 10-minutes. Re-plug the power cord and power back on.
2.
If the deep fryer still does not power on or heat up, please locate the
'Reset Button' on the control box. It is located on the BACK of the
control box next to the power cord socket.
3. The Reset Button is located inside a small hole. Unplug the deep
fryer from any power outlet. Use a small thin tool to stick into the
small hole to push in on the Reset Button and hold for 3 seconds.
4.
Re-plug the power cord and power back on.
CLEANING & CARE
1. Remove the lid and basket.
WARNING: Before cleaning the deep fryer, make sure that it is
disconnected from the power outlet, make sure the unit and the
oil has completely cooled. Oil retains its temperature for a long
period after use. Do not attempt to carry or move the deep fryer
while the oil is hot.
2. Wait for the fryer to cool completely, and then lift out the Control Box
Assembly & Heating Element.
3. Remove the oil container and pour out the oil. It is recommended to
filter the oil after each use if you are going to re-use the oil again.
4.
After removing the oil container, the fryer can be divided into several
separate assemblies to clean.
5.
The oil container, Fryer Lid/Filter and the Frying Baskets can be
washed in hot soapy water. Alternatively, these components are
dishwasher safe and can be cleaned in a dishwasher.
6.
The Control Box & Heating Element should ONLY be wiped clean with
absorbent towels. Then use a damp cloth and a mild soap to clean.
WARNING: Do NOT immerse the Control Box & Heating Element into
water or any other liquid to clean.
7.
Dry all parts thoroughly.
No te: Do not use abrasive scrubbing brushes or chemical cleaners to
clean the unit.
STORING YOUR DEEP FRYER:
Always allow the appliance to cool completely before storing. Store the
appliance in a dry location. Keep the power cord out of reach of children.
INSTALLATION & GROUNDING
6
CLEANING & CARE
7
7
Advertisement
