Sony DVP-FX720 Service Manual page 14

QQ
3 7 63 1515 0
4
Press X/x to select an item,
then press ENTER.
The settings for the selected item
appear.
Example: "TV Display"
General Setup
TV Display 4 : 3 Pan Scan
Angle Mark 4 : 3 Letter Box
Screen Saver 16 : 9
PBC On
DivX
Default
Select: ENTER Cancel: RETURN
Settings
5
Press X/x to select a setting,
then press ENTER.
The setting is selected and setup is
complete.
Example: "4:3 Pan Scan"
Selected setting
General Setup
TV Display 4 : 3 Pan Scan
Angle Mark On
Screen Saver On
PBC On
DivX
Default
Select: ENTER Cancel: RETURN
To turn off the Setup Display
Press OPTIONS or O RETURN twice.
TE
L 13942296513
Settings for the Sound
(Audio Setup)
"Audio Setup" allows you to set the
sound according to the playback and
connection conditions.
Select "Audio Setup" in the Setup
Display. To use the display, see "Using
the Setup Display" (page 40).
The default settings are underlined.
Audio Setup
Audio DRC Off
Digital Output On
Select: ENTER Cancel: RETURN
Audio DRC (Dynamic Range
Control) (DVD only)
Makes the sound clear when the volume
is turned down when playing a DVD that
conforms to "Audio DRC."
This function affects the output from the
following jacks:
– AUDIO jack
– OPTICAL OUT jack only when
"Dolby Digital" is set to "Downmix
PCM" (page 43).
On Makes low sounds clear
even if you turn the
volume down.
www
Off
Normally select this
position.
.
http://www.xiaoyu163.com
Settings for the
Display
(General Setup)
Choose playback display options and
settings according to the TV to be
connected.
Select "General Setup" in the Setup
Display. To use the display, see "Using
the Setup Display" (page 40).
The default settings are underlined.
General Setup
TV Display 16 : 9
Angle Mark On
Screen Saver On
PBC On
DivX
Default
Select: ENTER Cancel: RETURN
TV Display (DVD only)
Selects the aspect ratio of the connected
TV (4:3 standard or wide).
4:3 Select this when you
Pan Scan connect a 4:3 screen TV.
Automatically displays a
wide picture on the entire
screen and cuts off the
portions that do not fit.
4:3 Select this when you
Letter Box connect a 4:3 screen TV.
Displays a wide picture
with bands on the upper
and lower portions of the
screen.
16:9 Select this when you
connect a wide-screen TV
or a TV with a wide mode
function.
41
,continued
Digital Output
Selects if audio signals are output via the
OPTICAL OUT jack.
On Normally select this
position. When you select
"On," see "Setting the
digital output signal" for
further settings.
Off The influence of the digital
circuit upon the analog
circuit is minimal.
Setting the digital output
signal
Switches the method of outputting audio
signals when you connect an audio
equipment such as an AV amplifier
(receiver) with the OPTICAL OUT jack.
For connection details, see page 48.
After setting "Digital Output" to "On,"
select "Dolby Digital" and "DTS."
If you connect a component that is
incompatible with the selected audio
signal, a loud noise (or no sound) may be
heard from the speakers, damaging your
ears or speakers.
Dolby Digital (DVD only)
Selects the type of Dolby Digital signal.
Downmix Select this when the player
PCM is connected to an audio
component without a built-
in Dolby Digital decoder.
Dolby Digital Select this when the player
is connected to an audio
component with a built-in
Dolby Digital decoder.
x ao u163
y
i
43
,continued
http://www.xiaoyu163.com
2 9
8
4:3 Pan Scan
4:3 Letter Box
16:9
Note
Depending on the DVD, "4:3 Letter Box" may
be selected automatically instead of "4:3 Pan
Scan" or vice versa.
Angle Mark
Displays the angle mark when you can change
the viewing angles during playback of DVDs
recorded with multi-angles.
On Display the angle mark.
Off Hide the angle mark.
Screen Saver
The screen saver image appears when
you leave the player in pause or stop
mode for 15 minutes. The screen saver
will help prevent your display device
from becoming damaged (ghosting).
Press H to turn off the screen saver.
On Activates the screen saver
function.
Off Deactivates the screen
saver function.
Q Q
3 6 7 1 3
42
MPEG (DVD only)
Selects the type of MPEG audio signal.
PCM Select this when the player
is connected to an audio
component without a built-
in MPEG decoder. If you
play multi-channel MPEG
audio sound tracks, only
the Front (L) and Front (R)
signals will be output from
your two front speakers.
MPEG Select this when the player
is connected to an audio
component with a built-in
MPEG decoder.
DTS
Selects whether or not to output DTS
signals.
On Select this when the player
is connected to an audio
component with a built-in
DTS decoder.
Off Select this when the player
is connected to an audio
component without a
built-in DTS decoder.
.
44
1-10
9 4 2 8
PBC
By using the PBC (Playback Control)
function, you can enjoy playing
interactive programmes and
programmes with search functions
(page 26). This set up is effective when
you play back VIDEO CDs with the
PBC function. Set up becomes available
by opening and closing the disc lid after
setting.
On By the PBC function, you
can play back VIDEO
CDs via the menu screen.
Off Turn off the PBC function.
DivX
Displays the registration code for this
player. For more information, go to
http://www.divx.com
on the Internet.
Default
Each function returns to its original
factory settings. Note that all of your
settings will be lost.
1 5 0 5 8 2 9 9 4
Setting the Display or
Sound Track
Language
(Language Setup)
"Language Setup" allows you to set
various languages for the on-screen
display or sound track.
Select "Language Setup" in the Setup
Display. To use the display, see "Using
the Setup Display" (page 40).
Language Setup
OSD English
Disc Menu English
Subtitle English
Audio English
Select: ENTER Cancel: RETURN
OSD (On-Screen Display)
Switches the display language on the
screen.
Disc Menu (DVD VIDEO only)
Switches the language for the disc's
menu.
When you select "Original," the
language given priority in the disc is
selected.
Subtitle (DVD VIDEO only)
Switches the subtitle language.
When you select "Off," no subtitle is
m
displayed.
Audio (DVD VIDEO only)
co
Switches the language of the sound
track.
When you select "Original," the
language given priority in the disc is
selected.
9 9
2 8 9 9