C) Connection (Pairing) - VOLTCRAFT vc870 Operating Instructions Manual

c) Connection (pairing)

Before establishing a Bluetooth
for Bluetooth
®
menu and in the user manual for your mobile device and digital
multimeter (if available).
Now establish a connection:
1. Turn on the digital multimeter.
2. Switch the digital multimeter into PC mode by pressing and
holding the REL/PC button on the multimeter several times
for approx. 2 seconds until the
in the display.
3. Slide the ON/OFF (4) switch to ON to turn the adapter on. The
battery indicator lamp (2) and LED indicator lamp LINK (3)
light up briefly.
» The LED indicator lamp LINK flashes once (1x) in three
seconds.
» The adapter is now visible to mobile devices (broadcasting).
4. Create a new project/device in the app. Press the button
"CONNECT DMM" in the app.
5. The adapter shows up as a new device in the app. Select the
adapter.
» The LED indicator lamp LINK remains lit while pairing is in
progress.
6. On request, press and hold the PAIR button (5) for approx. 3
seconds to start pairing. Confirm the request in the app.
» The LED indicator lamp LINK goes out.
32
connections/data transmission in the app help
connection, read the instructions
®
–PC or symbol appears