TechniSat MultyVision ISIO 32 Quick Start Manual
  1. Manuals
  2. Brands
  3. TechniSat Manuals
  4. TV
  5. MultyVision ISIO 32
  6. Quick start manual
TechniSat MultyVision ISIO 32 Quick Start Manual

TechniSat MultyVision ISIO 32 Quick Start Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Quick start manual and
warranty document
MultyVision ISIO 32 / 40 / 46

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MultyVision ISIO 32 and is the answer not in the manual?

Questions and answers

Related Manuals for TechniSat MultyVision ISIO 32

Summary of Contents for TechniSat MultyVision ISIO 32

  • Page 1 Quick start manual and warranty document MultyVision ISIO 32 / 40 / 46...
  • Page 2 1 Illustrations Rear of TV (cover, connections, fastening) 17 18 USB port Antenna input 15 HDMI output (MultyVision ISIO 40 and (DVB-C, DVB-T, 16 HDMI input 1 MultyVision ISIO 46 only) analogue) 17 HDMI input 2 Network connection (LAN) Cable gland 18 Audio input (VGA/DVI) Card reader (for side connections)

  • Page 3: Please Read This First

    2 Please read this first Dear customer, This quick start manual describes in a simple way the most important connection options and the basic operating steps required to enable you to quickly start operating the MultyVision 32 ISIO, MultyVision 40 ISIO or MultyVision 46 ISIO. Please also ensure that you comply with the notes on safety provided under section 2 of the instruction manual on appropriate use, operation, power consumption in standby mode and during operation as well as on transporting and cleaning the television.
  • Page 4 The CE mark will then no longer apply. When selling an altered unit the person responsible for the conversion is accordingly liable to the manufacturer. Furthermore the TechniSat warranty shall no longer apply and can result in loss of warranty rights.
  • Page 5 2.3.2 Disposal The packaging material used for your TV consists entirely of recyclable materials. Please sort the components appropriately and dispose of them according to your local waste disposal regulations At the end of its useful life, this product should not be disposed of with your regular household waste.
  • Page 6 We recommend creating a backup copy of data located on your TV as restoring data is not part of the maintenance and repair work carried out in the event of a service. TechniSat accepts no responsibility for the loss of, or damage to, data during repair work. 2.3.6 Transportation Only transport the TV in a vertical position.

  • Page 7: Wall Mounting

    (2020/2750) suitable for the MultyVision ISIO 32 TechniMount (2020/2760) suitable for the MultyVision ISIO 32 / 40 / 46 You must remove the stand for wall mounting. 2.4.1 Removing the stand > Lay the TV down with the screen side on a level surface.

  • Page 8: Remote Control

    2.5.2 Remote control code By switching over the remote control option it is possible to use this remote control to operate a TechniSat television and two TechniSat receivers using the same coding. > Hold down the remote control code button to switch over the remote control option and press the OK button as often as necessary until the LED for the desired remote control option (TV, SAT1 or SAT2) flashes briefly.
  • Page 9 Remote control On/Standby Sleep timer Sound on/off Remote control code Numeric keypad keys TV/Radio mode Recording 0/AV (source Stop / DVR selection) Rewind Fast forward Pause / Playback Arrow keys Page up Page down Back Info Options selection Programme +/- Volume +/- Function selection Function keys...
  • Page 10 Front of TV (connections, display, local control) 15 16 Volume + AV input (at the front) 12 Cover flap for the Volume - (via AV adapter front connections Programme + 3.5 mm cinch jack, see 13 IR receiver Programme - page 5) 14 Display On/Standby...
  • Page 11 3 Connecting a Connection/s for the satellite antenna with the LNB input 1/LNB input 2. (Please note: the LNB must be connected to LNB input 1 when operating with an antenna signal.) b Connecting the cable connection (digital and/or analogue) or the DVB-T antenna to the antenna input on the television.
  • Page 12 To receive DVB-T signals and DVB-C and analogue cable channels simultaneously, use the TechniSat DVB-C/T switch (part no. 0000/3263). 3.3 BluRay/DVD player Connect your BluRay/DVD player using (for example) an HDMI connection cable with an HDMI connection.

  • Page 13: Basic Operation

    4 Basic operation Dear Customer The following section starts by covering basic operation as well as recurring operating steps for the TV. This should make it easier to read the instruction manual, since it avoids repeated description of identical steps at each individual stage. If it is necessary for a function or setting for the TV to be different from the basic operation, the difference in operation is described in detail at the relevant point in the instruction manual.
  • Page 14 4.2 Calling up the main menu and navigating through the menus / functions The following example will illustrate how you reach the main menu and call up a submenu. The objective of the example is to call up the Picture settings menu. >...
  • Page 15 > Use the up/down arrow keys to highlight the Picture settings item. > The Picture settings menu is opened by subsequently pressing the OK button. You can also highlight the individual menu items in the same way as you highlight an item on a submenu to open it and alter the respective settings.

  • Page 16: Changing A Setting

    4.3 Accepting settings / Exiting menus and functions In some menus and functions the changes made must be accepted manually in order to save them permanently. If this does not happen, the function or the values that existed before the change was made will be reset automatically on exiting the menu. If an Accept field or the green function key with Accept is displayed in the bottom line of the screen, you can see that the changes made must be saved manually to be accepted.
  • Page 17 4.4.1 Arrow selection method > is shown on the left and on the right next to the set value, you can alter this using the left/right arrow keys. 4.4.2 Selection list is shown on the right next to the set value, the value is changed using the selection list. >...
  • Page 18 4.4.3 Entering numbers > Enter the new setting you want using the numeric keypad key if a question mark or a number value is shown inside the highlight. Note the number of digits used in the entry as there must always be the same number used.
  • Page 19 If you are using a USB or wireless keyboard, for example the TechniSat ISIOControl keyboard (part no. 0001/3850), you can also use this keyboard to carry out all the input entered using the virtual keyboard.

  • Page 20: Options Selection

    4.5 Options selection In some menus and operating modes (e.g. TV mode, music/images playback etc.), you have the option of calling up additional functions and options via the options selection function. > Press the Options button to open the options selection function in the lower right- hand corner of the screen.

  • Page 21: Initial Installation

    5 Initial installation On initial installation of the TV, the AutoInstall installation wizard starts automatically. Using the installation wizard is the simplest way for you to create the most important settings for your TV. The initial installation process shown here serves merely as an example. The exact process for the initial installation will depend on the settings you select.
  • Page 22 Display mode > Use the up/down arrow keys to select your preferred display mode and confirm by pressing the OK button. You can change the selected display mode again to whatever you want after AutoInstall, in Settings > Picture settings. With the natural and intensive display modes, pay attention to the message and confirm with OK.
  • Page 23 Number of antenna signals (DVB-S) Select the number of attached DVB-S antenna feed lines. If the DVB-S source has been disabled, this page of the installation wizard does not appear; you are taken directly to the Antenna settings (DVB-T) page instead. >...
  • Page 24 Antenna configuration (DVB-T) A channel spectrum with the signal levels of the various channels is displayed in this step in order to be able to align the DVB-T antenna for the best reception. The Channel search / ISIPRO appears immediately if DVB-T has been disabled. >...
  • Page 25 Channel search / ISIPRO (DVB-S only) > To download the available current channel list, use the up/down arrow keys to highlight the ISIPRO - service list update line and start the process by pressing the OK button. After the service list update, an automatic channel search on all other configured reception sources is then carried out via All Channels.
  • Page 26 Software update > If you do not want to wait for a search for new software or a software download, you can, if necessary, skip this step by pressing the Info button. > If there is no new TV software available, you can press the OK button to go to the next step in the installation wizard.
  • Page 27 Loading SFIplus data Your TV has the SFIplus ("SiehFern Info") electronic programme guide. To enable the data for the electronic programme guide to be displayed, it must first be downloaded. To do this, your TV automatically starts downloading the SFIplus data as soon as any software updating has been completed.

  • Page 28: Lan Network Settings

    5.1 LAN network settings In the Network - LAN menu you can select IP mode, enter the IP address, subnet mask, gateway and DNS server and test the network connection and Internet speed. > Call up Main Menu > Settings > Special functions > Network settings - 5.1.1 IP mode >...

  • Page 29: Wlan Network Settings

    5.1.5 DNS server 1 / DNS server 2 > In these two lines enter the DNS server 1 and, if necessary, the DNS server 2 as well. 5.1.6 Check network connection / Internet speed > In the Network connection line, call up the Check item to test whether a connection to your router can be established using the previously configured settings.
  • Page 30 5.2.1 Selecting the WLAN network > Select the WLAN network to which you want to connect. A window opens with details of the encryption types and network name (SSID) and a field for entering the network key. If the network key has already been entered and saved, this is indicated with multiple stars in the display.
  • Page 31 5.2.3.1 IP mode > In this line select the IP mode (Static, DHCP Client or DHCP Server) in which the TV should operate. There are settings for the following functions here: Static In this setting the DHCP function is switched off. This means that the IP address, subnet mask, gateway, DNS server 1 and DNS server 2 must be manually adapted to your current network environment.
  • Page 32 5.2.3.6 Check network connection / Internet speed > In the Network connection line, call up the Check item to test whether a connection to your router can be established using the previously configured settings. If a is displayed next to the values, the test was successful. The speed is also displayed for the gateway and the DNS server(s).

  • Page 33: Remote Access

    With Mouse navigation, primarily using a keyboard with a trackball (e.g. the TechniSat ISIOControl keyboard, part no. 001/3850) makes sense. On the other hand, link navigation is recommended for use with a remote control. 5.3.8 Search engine >...

  • Page 34: Upnp Server

    If remote access should also be available when the MultyVision ISIO is on standby, the fast start function must be enabled. 5.4.1 Enabling/Disabling remote access > In the Remote Access line, switch the function on or off. The following settings (sections 5.4.2 - 5.4.6) can only be selected if remote access is enabled. 5.4.2 Password >...
  • Page 35 5.5.1 Enabling/Disabling the UPnP server > In the UPnP Server line, switch the function on or off. The following settings (sections 5.5.2 - 5.5.6) can only be selected if the UPnP server is enabled. 5.5.2 Configuration via HTTP > In this line, select whether you want to carry out the UPnP server configuration via the web browser on your PC or in this menu.
  • Page 36 5.5.4 UPnP medium > In this line, select the storage medium (internal hard disk, inserted USB storage device or inserted SD/MMC card) from which the films, pictures and music should be retrieved. Only storage media that are actually attached can be selected. As the data is not copied to the TV's internal hard disk, it can only be retrieved as long as the storage medium is connected.

  • Page 37: Operating The Unit

    6 Operating the unit 6.1 Switching the TV on and off 6.1.1 Switching on using the mains power switch on the television > Switch on the television by pressing in the mains power switch. The TV now performs an initialisation and cannot be operated during this time. This process can take a few seconds depending on the number of DVR recordings on the hard drive.

  • Page 38: Channel Selection

    6.2 Channel selection 6.2.1 Using the channel up/down buttons > You can switch between channels one at a time using the Channel +/- buttons on the remote control or on the TV. 6.2.2 Using the numeric pad keys > Use the numeric keypad keys to enter the number of the channel you want. For example: for channel slot 1 then 4...
  • Page 39 6.2.3.2 Selecting a list To make it easier for you to find channels, your TV provides various channel lists. You can select your favourites lists or display the channels sorted alphabetically from the list of All channels, the TV provider lists or according to genre. >...
  • Page 40 6.3 AV source > Press the AV button to open the AV sources selection window and select a device connected to the HDMI inputs (HDMI (front), HDMI 1 / 2), component input (YPbPr), Scart socket (EuroAV), VGA port (VGA), or front AV port (A/V (front)) on the TV. >...
  • Page 41 6.6 Volume control After switching on the television, sound is produced according to the power-on volume set using the Sound settings menu. > To adjust the volume of your TV, press Volume + to increase the volume, and Volume - to decrease it. 6.6.1 Using mute >...
  • Page 42 > You can exit Videotext by pressing the Back button. 6.11.2 Page selection > Use the numeric keypad keys 0 to 9 to enter the 3-digit page number of the teletext page you want. > Use the coloured function keys to call up the pages displayed in the respective fields. 6.12 Format switchover / Zoom >...

  • Page 43: Freeze Frame

    6.13.3 Exiting the PiP / PaP function > You can exit the PiP/PaP function by pressing the PiP / PaP button or by pressing the TV/Radio button. 6.14 Freeze frame > The television picture is displayed as freeze frame by pressing the Freeze frame button.

  • Page 44: Selecting A Function

    TV must be connected to the home network/DSL router via either LAN or WLAN. Internet access provides you with various Internet functions such as unrestricted browsing, use of interactive services, video on demand and the new ISIO Live TechniSat service portal.
  • Page 45 6.20.1 Using the Internet list to call up websites > From normal mode press the WWW button once or, if a website is open, press the WWW button again. The Internet List Navigator now appears. The last web link accessed is highlighted and loaded in the background.
  • Page 46 By pressing the Back button you can page backwards through previous pages, and by pressing the Info button you can page forwards to subsequent pages. If, for example, you are using the TechniSat ISIOControl keyboard (part no. 0001/3850) and mouse navigation has been enabled under section 5.3.7 of the quick start manual, you can also use the so-called trackball on the keyboard to control the cursor on the screen, designed to make Internet use considerably more convenient.
  • Page 47 6.20.4 Using tabs To make it faster and easier to switch between websites you have visited during a single session, you can create up to three different tabs. The tabs are closed when that particular session ends. > To open a new tab, go to the Options selection and select the New tab item under the Tabs option.

  • Page 48: Operating The Dvr

    7 Operating the DVR The DVR function (DVR = Digital Video Recorder) means you no longer have to use an external recorder (e.g. video or DVD recorder) to record programmes, as you can use this function to record them to the internal hard disk. DVR recordings of programmes can be made from sources such as DVB-S, DVB-C, DVB-T and analogue CT as well as the external sources A/V (front) and EuroAV.

  • Page 49: Dvr Playback

    7.1.3 Ending manual recording > First select the recording to be ended by selecting the channel on which the recording is running as described under section 6.2 of the quick start manual. > Pressing the Stop button generates a query as to whether the recording should be saved or discarded.
  • Page 50 The broadcast information can be displayed and hidden by repeatedly pressing the Info button. 7.2.1.1 When in TV mode > In TV mode press the Stop / DVR button to switch directly to the DVR Navigator. > Open the programme lists navigator by pressing the OK button and switch to the DVR Navigator by pressing the Stop / DVR button.
  • Page 51 > Pressing the Fast forward or Fast rewind button again causes you to jump forwards or backwards in 10 minute increments. > When you get to the place you want in the recording, you can return to normal playing mode by pressing the Pause / Playbackback button. 7.2.4 Jogshuttle function >...
  • Page 52 However, from the seventh month after the date of purchase, under legal provision, the obligation is on you to prove that the problem with the equipment already existed at the time of purchase. But TechniSat is offering you another solution. By submitting a fully completed and signed TechniSat registration card, your two-year legal warranty claim is converted into a three-year guarantee.
  • Page 53 How to register your product 1) Online registration: Just complete the guarantee form you will find online at the TechniSat website (www.technisat.com) and your product will be registered with TechniSat. 2) Registration by post:...

  • Page 54: Service Report

    Hence you are released from your legal obligation to prove that the item was faulty, for a period of three years from the purchase of your equipment (based on the billing date). In the event of a claim under warranty, you will receive - at TechniSat's discretion - a free repair to your equipment or an as-new equivalent replacement device.
  • Page 55 Note By signing here you declare your consent for TechniSat Digital GmbH to use your address for its own communications by post or email and give permission to contact you. Your data will not be forwarded to third parties. You can rescind your consent at any time by writing to TechniSat Digital GmbH, TechniPark, D-54550 Daun/ Vulkaneifel, Germany (for the attention of the Data Protection Offi...
  • Page 56 Your TV bears the CE symbol and complies with all requisite EU standards. Subject to change for amendments and printing errors Version 11/11 Duplication and reproduction only with the publisher's approval MultyVision 32 ISIO, MultyVision 40 ISIO, MultyVision 46 ISIO and TechniSat are registered trademarks of TechniSat Digital GmbH...

This manual is also suitable for:

Multyvision isio 40Multyvision isio 46

Table of Contents