Olympus E-PL6 Instruction Manual page 112

Using a diopter adjustment dial
Turn on the camera power, and then set the diopter adjustment dial to a position at
which an image is visible in the view ¿ nder.
• The angle can be changed up to a maximum 90°.
Manually switching between the viewÀ nder and monitor
Set the automatic switch to off, and control the switching using the u button on the
external view¿ nder.
In the # Accessory Port Menu, select [CEVF] and press the
1
2
Select [EVF Auto Switch] and press the
• The same menu can also be displayed by pressing and holding the u button on the
VF-4.
3
Select [Off] and press the
• Press the u button on the external view¿ nder to switch between the display
between the view¿ nder and monitor.
Main SpeciÀ cations (VF-4)
Display pixels
Field of view
10
View¿ nder
magni¿ cation
Eye point
Diopter adjustment
range
Weight
Dimensions
#
Cautions
• When carrying the camera, do not hold it by the view¿ nder.
• Do not allow direct sunlight to pass into the view¿ nder through the eyepiece lens.
112
Diopter adjustment dial
Eye-sensor
u button
button.
Approx. 2,360,000 dots
100 %
Approx 1.48 (-1 m
Approx. 21 mm (-1 m
-4.0 to +2.0 m
42 g (0.09 lb) (without connector cover)
30.4 mm (W) × 48.2 mm (H) × 47.8 mm (D)
(1.2" × 1.9" × 1.9")
button.
-1
50 mm lens/in¿ nity)
-1 ) (from the back of eyepiece lens)
-1
button.