Olympus E-PL6 Instruction Manual page 102

Monitor
indication
m
Internal camera
temperature is too
high. Please wait
for cooling before
camera use.
Battery Empty
No Connection
6
No Paper
No Ink
Jammed
Settings Changed
Print Error
Cannot Print
The lens is locked.
Please extend the
lens.
Please check the
status of a lens.
102
Possible cause
The internal temperature of
the camera has risen due to
sequential shooting.
The battery is drained.
The camera is not correctly
connected to a computer, printer,
HDMI display, or other device.
There is no paper in the printer.
The printer has run out of ink.
The paper is jammed.
The printer's paper cassette has
been removed or the printer has
been manipulated while making
settings on the camera.
There is a problem with the
printer and/or camera.
Pictures recorded on other
cameras may not be printed on
this camera.
The lens of the retractable lens
stays retracted.
An abnormality has occurred
between the camera and the
lens.
Corrective action
Turn off the camera and wait for
the internal temperature to cool.
Wait a moment for the camera to
turn off automatically.
Allow the internal temperature
of the camera to cool before
resuming operations.
Charge the battery.
Reconnect the camera.
Load some paper in the printer.
Replace the ink cartridge in the
printer.
Remove the jammed paper.
Do not manipulate the printer
while making settings on the
camera.
Turn off camera and printer.
Check the printer and remedy any
problems before turning the power
on again.
Use a personal computer to print.
Extend the lens. (P. 13)
Turn off the camera, check the
connection with the lens, and turn
the power on again.