NETGEAR DG834 ADSL Firewall Router DG834 DG834 Reference Manual page 212

Reference Manual for the ADSL Firewall Router DG834
Click Show Status. The resulting screen should show Update OK: good (see
c.
Figure E-10).
Figure E-10: Status Screen
Configure the DG834 as in the Gateway-to-Gateway procedures using the VPN Wizard (see
5.
"How to Set Up a Gateway-to-Gateway VPN Configuration" on page
use appropriate network addresses for the environment.
The LAN Addresses used in this example are as follows.
• DG834
LAN IP = 10.5.6.1
LAN Subnet Mask = 255.255.255.0
• FVL328
LAN IP = 172.23.9.1
LAN Subnet Mask = 255.255.255.0
In Step 1, enter toFVL328 for the Connection Name.
a.
In Step 2, enter fvl328.dyndns.org for the remote WAN's IP address.
b.
In Step 3, enter the following:
a.
• IP Address = 172.23.9.1
• Subnet Mask = 255.255.255.0
E-12
202-10005-05, June 2005
7-20), being certain to
NETGEAR VPN Configuration