Activate The Vpn Tunnel By Pinging The Remote Endpoint - NETGEAR DG834 ADSL Firewall Router DG834 DG834 Reference Manual

Reference Manual for the ADSL Firewall Router DG834
Figure 7-30: VPN Status/Log Screen
Click on VPN Status
3.
(Figure 7-31). Click on Connect for the VPN tunnel you want to activate.
Figure 7-31: Current VPN Tunnels (SAs) Screen

Activate the VPN Tunnel by Pinging the Remote Endpoint

Note: This section uses 192.168.3.1 for an example remote endpoint LAN IP address.
7-28
(Figure 7-30) to get the Current VPN Tunnels (SAs) screen
202-10005-05, June 2005
Virtual Private Networking (Advanced Feature)