NETGEAR DG834 ADSL Firewall Router DG834 DG834 Reference Manual page 116

Reference Manual for the ADSL Firewall Router DG834
Repeat for the DG834 on LAN B and pay special attention to use the following network
6.
settings as appropriate.
• WAN IP of the remote VPN gateway (e.g., 14.15.16.17)
• LAN IP settings of the remote VPN gateway:
— IP Address (e.g, 192.168.0.1)
— Subnet Mask (e.g., 255.255.255.0)
— Preshared Key (e.g., 12345678)
Use the VPN Status screen to activate the VPN tunnel by performing the following steps:
7.
Note: The VPN Status screen is only one of three ways to active a VPN tunnel. See
"Activating a VPN Tunnel" on page 7-27
Open the DG834 management interface and click on VPN Status to get the VPN Status/
a.
Log screen (Figure
Figure 7-28: VPN Status/Log Screen
Click on VPN Status
b.
(Figure 7-29). Click on Connect for the VPN tunnel you want to activate.
7-26
7-28).
(Figure 7-30) to get the Current VPN Tunnels (SAs) screen
202-10005-05, June 2005
for information on the other ways.
Virtual Private Networking (Advanced Feature)