Table of Contents
Advertisement
MXW-920i O
'
M
WNER
S
ANUAL
Battery Installation
Open the battery cover by using a Phillips screwdriver to remove each
of the four screws. Remove the cover. Observe the + and - polarity
indications inside the battery compartment. Place the four AAA batteries
into their positions in the battery compartmentobserving the + and -
polarity indicators on the batteries. Now, replace the battery cover by
replacing the 4 screws into their slots.
Specifications
Memory: 4 Megabits of Flash Memory (for User Configuration)
Devices: Flexible, typically can support up to 40 Devices
Pages: Flexible, typically can support up to 40 Pages on each Device
Learning Capability: Standard frequencies (15kHz to 460kHz)
Macro Capability: Up to 255 steps each, however nesting is allowed
IR Range (Line of Sight via Infrared): 30-50 feet, depending on the environment
RF Range (radio frequency): 50 to 100 feet, depending upon the environment
RF Frequency: 433.92 MHz
Weight: 5.68 ounces (without batteries)
Size: 8.9" H x 2.34" W x 1.1" D
Batteries: 4 AAA Batteries
Page 10
Advertisement
Table of Contents
