NETGEAR CG814WG Hardware Manual page 51

Install the CG814WG Wireless Cable
Modem Gateway.
Locate an available CardBus slot on the
a.
side of your notebook. Hold the PC Card
with the Netgear logo facing up and
insert it into the CardBus slot.
The Found New Hardware Wizard is
displayed.
Click Next and follow the prompts to
b.
proceed.
Click Continue Anyway if you are
prompted with a Windows XP Logo testing
message.
After the installation completes, click Finish
to close the wizard.
You should see the CG814WG system tray
icon on the right in the lower right portion of
the Windows task bar.
Windows XP will display a Wireless
Network Connection message.
Configuring Wireless Security in Windows XP
Hardware Manual for the Model CG814WG Wireless Cable Modem Gateway
Add New Hardware Wizard
CG814WG System Tray Icon
Windows XP Network Connection Alert
C-5