NETGEAR CG814WG Hardware Manual page 16

Hardware Manual for the Model CG814WG Wireless Cable Modem Gateway
Table 1-1. LED Descriptions
Test On
Off
Cable Link On (Green)
Off
Cable On
Downstream
Traffic Off
Cable On
Upstream
Traffic Off
Wireless On
Blink
Local On (Green)
(Local Area Blink (Green)
Network) On (Yellow)
Blink (Yellow)
Off
USB On (Green)
Blink (Green)
Off
1-6
A system failure has occurred. Reboot the gateway.
Normal operation.
Configuration of the cable interface by your cable service provider
is complete.
Configuration of the cable interface is still in progress.
Data is being received from the network to the gateway on the
cable interface.
The cable interface is idle.
Data is being transmitted from the gateway to the network on the
cable interface.
The cable interface is idle.
Indicates that the wireless Access Point is operating normally.
Data is being transmitted or received on the wireless interface.
The Local port has detected link with a 100 Mbps device.
Data is being transmitted or received at 100 Mbps.
The Local port has detected link with a 10 Mbps device.
Data is being transmitted or received at 10 Mbps.
No link is detected on this port.
The Local port has detected link with a USB device.
Data is being transmitted or received through USB.
No link is detected on the USB port.
Hardware Overview