Footbed Adjustment; Back Height Adjustment; Seat Depth Adjustment - Leggero DYNO User Manual

DYNO

4.9 Footbed Adjustment

1. Loosen button head bolts 1 on left and right
clamps (2 bolts per side). 4mm hex wrench
required.
2. Slide footbed up or down to desired position.
3. Tighten bolts.
4. Footbed position can also be moved front to
back by removing and reinstalling flat head
bolts 2 (2 per side) in different hole positions.
4mm hex wrench required.

4.10 Back Height Adjustment

1. Pull back height adjustment levers outward,
reference Figure 15.
2. Adjust back height to desired position.
3. Push back height adjustment levers inward until
they snap into locked position.
Unlocked

4.11 Seat Depth Adjustment

1. Loosen seat cushion straps.
2. Loosen knob under center of seat plate.
3. Adjust front seat assembly to desired depth.
4. Tighten knob.
5. Tighten seat cushion straps.
Locked
Knob
Page 16
User Manual
2
1
Figure 14
Figure 15
Figure 16